Research Article | Open Access
Volume 2 | Issue 7 | Year 2015 | Article Id. IJME-V2I7P106 | DOI : https://doi.org/10.14445/23488360/IJME-V2I7P106Effective Use Of Recycled Raw Material In Selective Laser Sintering Process
Gurinder Singh, Dr. Beant singh
Citation :
Gurinder Singh, Dr. Beant singh, "Effective Use Of Recycled Raw Material In Selective Laser Sintering Process," International Journal of Mechanical Engineering, vol. 2, no. 7, pp. 23-30, 2015. Crossref, https://doi.org/10.14445/23488360/IJME-V2I7P106
Abstract
This paper gives us an overview about the Selective Laser Sintering process. The raw materails that are used in Selective Laser Sintering process. The conventional parameters that are set by the machine manufacturer for using the polyamide raw materials. How large inventories of waste powder are generated due to supplier suggested way of using raw material. How the quality of powder and product is effected with time and recycling and how to use this re-cycled powder effectively to reduce these inventories.
Keywords
Selective Laser Sintering, Dura Form PA, Tensile testing, etc
References
[1] J. Choren, V. Gervasi, T. Herman, S. Kamara, and J. Mitchell(): SLS powder life study. Rapid Prototyping Centre, Milwaukee School of Engineering.
[2] Ö. İlkgün (2005): Effects of production parameters on porosity and hole properties in laser sintering rapid prototyping process. M.Sc. thesis in Mechanical Engineering. Middle East Technical University.
[3] J.P. Kruth et al. - “Lasers and Materials in Selective Laser Sintering”-Proceeding of 3rd Laser Assisted Nearshape Engineering Conference (LANE-2001), Erlangen, Germany: Lehrstuhl fur Fertigungs technologie, 2001, pp. 3–24.
[4] The web site of www.astm.org/Standard/index.shtml
[5] The web site of http://www.3trpd.co.uk/sls.htm.
[6] The web site of http://www.3dsystems.com/materials/duraformr-pa
[7] The web site of www.3dsystems.com/3d-printers/production/spro-60-hd
PDF
Citation
Abstract
Keywords
References