Single CDBA Realization of Inverse Filters

T. S. Rathore

doi:https://doi.org/10.14445/23488549/IJECE-V8I8P101

Research Article | Open Access

Volume 8 | Issue 8 | Year 2021 | Article Id. IJECE-V8I8P101 | DOI : https://doi.org/10.14445/23488549/IJECE-V8I8P101

Single CDBA Realization of Inverse Filters

T. S. Rathore, Prasoon Vishwakarma

Citation :

T. S. Rathore, Prasoon Vishwakarma, "Single CDBA Realization of Inverse Filters," International Journal of Electronics and Communication Engineering, vol. 8, no. 8, pp. 1-3, 2021. Crossref, https://doi.org/10.14445/23488549/IJECE-V8I8P101

Abstract

A new single CDBA configuration is introduced, which can realize all the five generic inverse filters. Capacitors are either actually grounded or virtually grounded.

Keywords

CDBA, inverse filter functions, inverse low pass filter, inverse high pass filter, inverse bandpass filter, inverse band-reject filter, inverse all-pass filter.

References

[1] H. -Y. Wang and C. T. Lee, Using nullors for the realization of current-mode FTFN-based inverse filters Electron. Lett. 35() (1999) 1889-.
[2] B. Chipipop and W. Surakampontorn, Realisation of current-mode FTFN-based inverse filter, Electron. Lett. 35(9)(1999) 690– 692
[3] M. T. Abuelma'atti, A novel multifunction CFOA-based inverse filter, Frequenz 54() (2000) 284.
[4] S. S. Gupta, D. R. Bhaskar, R. Senani, and A. K. Singh, Inverse active filters were employing CFOAs Electr. Eng. 91 (23) (2009).
[5] S. S. Gupta, D. R. Bhaskar, and R. Senani, New analog inverse filters realized with current-feedback op-amps, Int. J. Electron. 98() (2011) 1103-1113.
[6] H. -Y. Wang, S. -H. Chang, T. -Y. Yang, and P. -Y. Tsai, A Novel Multifunction CFOA-Based Inverse Filter, Circuits Syst., 2(1) (2011) 14-17.
[7] V. Patil and R. K. Sharma, Novel inverse active filters were employing CFOA., Int. J. Sci. Res. Dev. 3(2015) 359-360.
[8] N. Herencsar, A. Lahiri, J. Koton, and K. Vrba, Realizations of second-order inverse active filters using minimum passive components and DDCCs, Proc. of 33rd Int. Conf. on Telecommunications and Signal Process.-TSP, (2010) 38-41.
[9] T. Tsukutani, Y. Sumi, and N. Yabuki, Electronically tuneable inverse active filters were employing OTAs and grounded capacitors, Int. J. of Electron. Lett. 4(2014) 166–176.
[10] C. K. Choubey, G. Tiwari, and S. K. Paul, CCII based multifunction inverse filter Int. Conf. on Adv. in Electron. Commun. and Comp. Technol., 2(16) (2016) 160-163
[11] T. Tsukutani, Y. Kunugasa, and N. Yabuki, Inverse Band Reject and All-Pass Filter Structure Employing CMOS CDBAs, J. Electr. Eng., 8(9), (2019) 39-44.
[12] P. Kumar, N. Pandey, and S. K. Paul, Realization of resistor less and electronically tunable inverse filters using VDTA, J. Circuits, Syst. Comp. 28() (2018).
[13] A. K. Singh, A. Gupta, and R. Senani, OTRA-based multi-function inverse filter configuration, Adv. in Elect. And Electron. Eng. 15() (2018) 846-856.
[14] A. Pradhan and R. K. Sharma, Generation of OTRA-based inverse all pass and inverse band-reject filters, Proc. Natl. Acad. Sci. India, Sect. A Phys. Sci. 90() (2020). 481-491.
[15] S. Banerjee, M. Ghosh, and P. Mondal, the realization of inverse active filters using a single current differencing buffered amplifier, Int. Conf. on Commun. and Signal Process. 148 (2019).
[16] J. K. Pathak, A. K. Singh, and R. Senani, New canonic lossy inductor using a single CDBA and its application, Int. J. Electron. 103(1) (2015).
[17] A. R. Nasir and S. N. Ahmad, A novel current-mode multifunction inverse filter using single CFA Int. J. Innovative Technology and Exploring Engineering, 10(8) (2021) 64-67.
[18] R. Pandey, N. Pandey, T. Negi, and V. Garg, CDBA based universal inverse filter, ISRN Electronics, (2013) 1-6.
[19] R. Bhagat, D. R. Bhaskar, and P. Kumar, Inverse band reject and all-pass filter structure employing CMOS CDBAs, Int. J. Eng. Res. Technol., 8(9) (2019) 39-44.
[20] R. Bhagat, D. R. Bhaskar, and P. Kumar, Multifunction filter/inverse filter configuration employing CMOS CDBAs, Int. J. Recent Technol. Eng., 8(4) (2019) 8844-8853.
[21] T. K. Paul, S. Roy, R. R. Pal, Realization of inverse active filters using the single current differencing buffered amplifier, J. Sci. Res., 13(1)(2021) 85-99.
[22] C. Acar and S. Ozoguz, A new versatile building block: current differencing buffered amplifier suitable for analog signal processing filters, Microelectron, J., 30(2) (1999) 157-160.